Knowledge

Plastic mold is the abbreviation of a combined mold for compression molding, extrusion molding, injection molding, blow molding and low foam molding. Die-casting die is a method of

When the single parting surface injection mold is opened, the movable mold and the fixed mold are separated to take out the plastic parts, which is called a single parting surface

4. The movable template is bent. When the injection mold is injected, the molten plastic in the cavity produces a huge back pressure, generally 600 ~ 1000 kg/cm2. Mold makers somet

How are injection molds processed to produce plastic products? 1. Heating, pre-plasticizing Driven by the transmission system, the screw conveys and compacts the material from the

How to avoid the peculiar smell of injection molding ? Strictly control the use of additives The tertiary amine catalyst used in the production process of polyurethane foam will br

With the further promotion of the application of plastics as engineering structural materials, the use of injection molded products has been expanded to various fields of the natio

1. Before processing each program, it is necessary to strictly confirm whether the tool on the program is consistent with the program. 2. When installing the tool, make sure that t

The process of precision parts processing has extremely strict requirements. A little carelessness during processing will cause the error of the workpiece to exceed the tolerance r

The concept of tool radius compensation is just like using tool length compensation in programming, basically without considering the length of the tool. Because of the tool radius

Precautions for cnc parts processing: The basic principle of processing is incorrect Critical errors in CNC parts processing are caused by similar machining exercises or similar to

Aluminum shell CNC machining skills refer to CNC machine tool processing, which is machine equipment processing under the intelligent manipulation of electronic computers. Under th

Machining method of slender shaft of small precision parts machining: Due to the poor rigidity of the slender shaft, it is extremely easy to deform during processing, which greatly